- Maison
- Fils d'alimentation
- Acheter Leads
- A propos de nous
- Produits
- Nouvelles
- Honneurs
- Message
- Contacter
- Les catégories de produit
- Liens amicaux
Nom de l'information: | Distributeur d'Anhui Hills ups aux Etats-Unis |
Publié: | 2013-06-05 |
Validité: | 365 |
Caractéristiques: | 3C330kva |
Quantité: | 1000.00 |
Description Prix: | |
Description détaillée du produit: | 1. Description du produit: 10-200KVA UPS entièrement numérique, est le nouveau siècle, nouveaux produits, collection numérisation, la technologie de l'information, du réseau dans l'un des produits de haute intelligents, avec une forte systèmes de collecte de l'information, des systèmes de traitement du signal, systèmes de détection et d'améliorer les systèmes de protection. Largement utilisé dans divers environnements électriques, la conception personnalisée, la fonction de conversation homme-machine conviviale, moniteur tactile LCD écran est le dernier développement du module d'affichage de l'onduleur, en utilisant l'interface la plus populaire et la plus intuitive utilisateur graphique. Module d'affichage à cristaux liquides avec une comparaison générale de l'écran module d'affichage tactile aucun des étapes compliquées, les utilisateurs appuyez simplement sur le bouton sur le moniteur pour obtenir l'information analogique correspondant, facile à comprendre; est également livré avec l'écran tactile d'affichage des modules de mémoire horloge en temps réel, peut enregistrer 256 journaux d'événements et d'autres paramètres. 2. exigences d'exploitation: Avant d'utiliser ce produit, s'il vous pla?t lire attentivement ce manuel. Le manuel doit être lu par les professionnels à comprendre et à épargner. Le manuel de technologie spécifique n'est pas expliquée en détail. ? Ce manuel s'applique seulement trente-trois produits de type UPS. Ce manuel doit être utilisé à titre de référence, dans l'important travail de la police ou de l'Etat pour obtenir des conseils. 3. Note: 3,1 s'assurer que le niveau de puissance n'est pas inférieure à l'entrée correspondante, la sortie, les cables de batterie. 3.2 Doit avoir un dispositif de mise à la terre fiable. 3.3 La machine a beaucoup de dispositif de stockage d'énergie élevée, s'il vous pla?t ne pas ouvrir le chèque de bo?te, ou causés par la sécurité de vie à vos risques et périls. Les opérateurs doivent également comprendre les bases du manuel d'instructions électriques et familier. 3,4 Unauthorized pas démonter divers cables de connexion. 3.5 En tant que produit grand, plus lourd, ne sont pas libres de se déplacer, pas de forte vibrations de Split et de maintenir une bonne ventilation. 3.6 Dans le cas des vivants, ne peut pas aller à s'acquitter de poussière; ne peut pas utiliser une serviette humide pour essuyer la saleté. 3.7 La batterie doit être remplacée par un personnel professionnel et technique, le remplacement de la batterie doit être envoyé organismes de recyclage spéciaux. La batterie est ?déchets toxiques?. 3.8.UPS longtemps après l'installation n'est pas utilisée, la batterie se décharge automatiquement la configuration, tandis que l'énergie chimique de la batterie consommera automatiquement, en fonction de l'environnement et le climat autour de 25 degrés Celsius, la batterie doit être rechargée tous les trois mois, si la température est supérieure à 30 degrés Celsius, la batterie se recharge une fois tous les deux mois. Juste au moment où le chargement commence UPS, et en mode de fonctionnement normal au moins 24 heures. 4, le principe de fonctionnement: 4.1 Trois trois band écran tactile UPS Série du travail est le degré d'intégration de la technologie numérique pour améliorer le MTBF et la fiabilité d'un comité de contr?le indépendant pour contr?ler l'ensemble du fonctionnement du système, en utilisant le contr?le de microprocesseur à grande vitesse pour s'assurer que l'équipement fonctionnement stable et fiable. En plus de dessiner à l'extérieur, UPS D'autres composants sont: le transformateur inverseur, inductance d'entrée, IGBT, SCR, commutateurs, etc. Norme 4.2 principe de l'onduleur: 4,3 principe de l'onduleur électrique municipale:. L'redresseur convertit AC entrée du filtre DC, puis à travers un Inverter sortie d'alimentation AC SPWM. 4.3.1 Mode normal de l'onduleur: la batterie est complètement chargée, seule l'alimentation alternative redressée pour la sortie de l'onduleur. |
Vous êtes le 7119 visiteur
Droit d'auteur © GuangDong ICP No. 10089450, Tak Technology Co., Ltd de Beijing Hua Binxin Tous droits réservés.
Support technique: ShenZhen AllWays Technologie Développement Co., Ltd.
AllSources réseau's désistement: La légitimité de l'information de l'entreprise ne s'engage pas à toute responsabilité de garantie